How to measure for customized wardrobe
In the process of customizing your wardrobe, measuring is a crucial step. Accurate dimensional measurements not only ensure that the wardrobe fits perfectly into the space, but also avoid many problems during subsequent installation and use. This article will introduce in detail the measuring steps, precautions and common questions for customizing a wardrobe to help you successfully complete this key step.
1. Preparation before measuring the ruler
Before starting measurement, you need to make the following preparations:
1.Clean the measurement area: Make sure that the debris in the wardrobe installation area has been cleared to avoid affecting the measurement accuracy.
2.Preparation tools: A tape measure, level, pen and paper are essential tools. If possible, you can use a laser rangefinder to improve accuracy.
3.Record spatial information: Including the flatness of walls, floors, and ceilings, as well as whether there are obstacles such as pipes and sockets.
| Tool name | Purpose |
|---|---|
| tape measure | Measure length, width and height |
| spirit level | Check the flatness of walls and floors |
| laser rangefinder | Improve measurement accuracy, especially suitable for large spaces |
2. Specific steps of measuring ruler
1.Measure width: Measure the width of the wall from left to right. It is recommended to measure 3 times at different heights (top, middle, bottom), and take the minimum value as the effective width.
2.Measure height: Measure the height from the floor to the ceiling, and also measure it multiple times at different locations to ensure accurate data.
3.Measure depth: According to the design requirements of the wardrobe, measure the depth of the wall, usually the depth is between 55-60 cm.
4.Check flatness: Use a level to check the flatness of the wall and floor. If there is any tilt, record the deviation.
| Measurement items | Measurement method | Things to note |
|---|---|---|
| Width | Measure from left to right, three points | Take the minimum value |
| height | Floor to ceiling, multi-point measurement | Record lowest value |
| Depth | wall depth | Usually 55-60 cm |
3. Common problems and solutions in measuring tapes
1.The wall is uneven: If the wall is tilted, the degree of tilt needs to be recorded and room for adjustment should be reserved during design.
2.Pipe or outlet blocked: Mark the locations of pipes and sockets in advance to avoid affecting use after the wardrobe is installed.
3.measurement error: Take the average of multiple measurements, or use a laser rangefinder to reduce errors.
4. Things to note after measuring the ruler
1.Communicate with designers: Provide measurement data to designers to ensure that the design plan matches the actual space.
2.Check size: Before wardrobe production, it is recommended to double-check the dimensions to avoid installation problems caused by errors.
3.Reserve installation space: Considering the adjustment needs during installation, it is recommended to reserve a buffer space of 1-2 cm.
Summary
Customizing your wardrobe's measurements is a crucial step in making sure your wardrobe fits the space perfectly. Through scientific measurement methods and meticulous records, problems in subsequent installation and use can be avoided. I hope the guidance in this article will help you successfully complete the measuring task and create the ideal wardrobe space.
check the details
check the details
en
